Turns well and looks fantastic in its own right or as an alternate to wood for the colour.
Matches extremely well with gold, I...
New growth green with white and black...
The Single-barrel Wall Street Pencil...
New growth green with white and black lines.
19mm X 19mm 130mm
Buy now! There aren't many left...
|Country of Origin||China|
|Colour||Black, White/Cream, Green|
|Size||18mm x 18mm x 130mm|
|Shade||Bright / Lumo|
Acrylic blanks make for beautiful pens as they shine up so well. They should be turned at the same speed used for wooden pen blanks. To reduce the likelihood of the material chipping while turning, keep your tools sharp.
When turning acrylic material, you should produce cuts of acrylic “ribbons” that curl away from the blank as the lathe spins. Acrylic can chip away if excessive force is applied to the chisel.
When turning the acrylic blank, do not turn down to level with the bushings, allow ample material for sanding in order to prevent the blank from being under sized when complete.
For a high gloss finish, use wet sandpaper up to 2000 grit, or Micro Mesh 12 000. Thereafter, shine up with a polishing compound
Please note: Some of the lighter coloured blanks are transluscent and as a result the brass pen tube might show through. To prevent this from happening, paint the tube a colour similar to the acrylic blank before glueing it in.
5.0 / 5
Why review our products?
You help other people in their purchases by sharing your experience.