Specials

New products

Information

How to adjust the Bolt position on a Bolt Action Pen

This guide shows how to adjust the position of the bolt and clip on a Bolt Action Pen Kit for left or right handed operation.

The Bolt Action Pen Kit is shipped with the bolt and clip pre-set for right-handed operation. To adjust the bolt, follow these quick steps:

  1. A screw holds the bolt in place and is located inside the back-end of the pen on the pen-barrel side. Use a phillips screwdriver to loosen the screw located inside the back end of the barrel.
    Loosen the bolt action screw
  2. After loosening the screw, the bolt will become loose. Turn the bolt 180º so that it faces the opposite direction.
    Reposition the bolt action pen boltReposition the bolt action pen boltReposition the bolt action pen bolt
  3. Tighten the screw in the back end of the pen to secure the bolt in place in its new position. Take care not to overtighten the screw.
  4. Taking care not to damage the pen cap, gently unscrew the bullet cap on the back of the pen. This will enable you to move and reposition the pen clip as desired.
    Reposition the bolt action pen clip
  5. After repositioning the pen clip, screw the cap back onto the pen and finger-tighten.
    Repositioned bolt action pen bolt and clip